Changzhou Co-Net Electronic Technology Co.,Ltd.

How to connect broken fibers, the following DOME fiber closure manufacturers will share the specific locations of the two fibers: 1. After preparing 1.5 times, prepare the fibers around the coil, and then coil all the remaining fibers in the box. 2. For single-core fiber trays, please use single-core buffer tubes; For ribbon fiber trays, use ribbon buffer tubes. Nail the nail with a nylon cable tie at the inlet of the splice tray. 3. Docking two (belly) fibers according to the specified method. The connector snaps into the slot of the fusion unit. The excess length should be coiled in the disk. 4. Cover the connector tray and press to place it in place. 5. According to the different capacities required by the junction box, determine the number of disks to be superimposed on the welded plate. The superimposed form of the soldering plate must meet the requirements of the plug-in card fusion splice unit and inspection and maintenance of the fiber optic connector.